SimonM
08-02-2008, 11:55 AM
I was glueing the servos back in my SuperCub - because in 'flight' only the servos moved - not much use till I glued them back. :D
When repairing them I unplugged and removed the receiver. Looking at the receiver (with the tail above the prop) there is a group of connectors (4 pins) for the ACT sensors and a single link (two pins).
1. Which ACT sensor (top or bottom) is plugged in left and which on the right?
2. Which way does the plug (red/black) wires plug in?
3. What does the link do?
Kind regards,
Simon
When repairing them I unplugged and removed the receiver. Looking at the receiver (with the tail above the prop) there is a group of connectors (4 pins) for the ACT sensors and a single link (two pins).
1. Which ACT sensor (top or bottom) is plugged in left and which on the right?
2. Which way does the plug (red/black) wires plug in?
3. What does the link do?
Kind regards,
Simon