PDA

View Full Version : 240v Mains Adapter

Stoka
08-28-2008, 04:39 PM
Does anyone know if the Mains Adapater listed on the SL website is compatible with the PZ Lipo Charger?
Radweld
08-28-2008, 09:44 PM
It should be fine. It's rated at 5A continuous and your not going to charge a Lipo at more than 1C or about 2A
karlwb
08-29-2008, 11:45 PM
yep it's fine,i use that mains adapter for both chargers nimh or lipo,no problem
Simon737
09-19-2008, 08:49 PM
I'm having a problem with my mains adapter, I've plugged in my lipo charger that I got with the T28 and set it to 1.5 amps to charge my 1800 11.1V battery and the adapter has gone dead after about 6-7 full charges and balances. Anyone know what i'm doing wrong?

Thanks
Stoka
09-21-2008, 03:08 PM
Is there any way that it could be over heating? Or blown fuse maybe??
Anthony
09-21-2008, 03:24 PM
My chargers have been breaking too when using them with the mains adapter. I've been through 3 so far. They just heat up and eventually make a lot of noise and then the light goes out and they dont work.
Simon737
09-21-2008, 10:09 PM
yeah overheating seems to be the issue!