ESC/Rx (Receiver)

[stumpy]

I have a P51, had the same problem as a few others that the battery cover falls out, causing the battery to eject :mad: not good, it hit the ground hard.
I have replaced and repaired her but noted the arial wire was pulled out of the ESC/Rx (Receiver). has any one got a wiring diagram for one or got one that they can send me a pic so i can re fix the cable to the correct point on the board please, as i cannot see where it was originally attached. hope some one can help, :D

[zippy5131]

Hi mate, checked in my P51 and the receiver is the same as the FW. So took some piccies for you of my FW RX. The best way around this is to use a 1mm soldering tip, that's what I use for all my electronics projects along with a antex soldering iron. if you look you will see that the aerial cable threads through the top of the board pic 1. Then solders to the resistor on the bottom of the board ( the green one). pic 2 and 3. Hope this helps.:cool: