Advice & Sales: 0845 872 5390 |
|
#1
|
|||
|
|||
|
Hopefully one of our boffins can answer this little poser? I have a 30c 2700mah lipo, and it has been balance charging at 1.5amps for a little over 3hrs, however my B6 charger indicates that it has so far juiced it with 2961mah
I've only used this particular batt a couple of times, and all seems in order after using it. I do have another of the same type / capacity / dimensions and I'm pretty sure this charged within its capacity but I will double check the next time I fly.My questions is, does this indicate an obvious problem with the lipo, or maybe the manufacturer stuck the wrong label on
|
|
#2
|
|||
|
|||
|
I also charged my 1500mah Turnigy batt that I use in my Rad, and my charger indicated 1700 ish mah went into it
Have I missed something here? I'd re read the idiots guide but Chinglish isn't my 2nd language
|
|
#3
|
|||
|
|||
|
Wouldn't worry about it...seen the same myself, had no issues with the batteries.
__________________
Hangar =E-Flite Blade mSR + Blade 400, RC Factory Yak 55, 3DHS 51" AJ Slick, 3DHS 70" AJ Slick a 3DHS 87" Extra 300 SHP, 3DHS 68", a 57" 3DHS Extra 330SC, 65" 3DHS Vyper, 62" 3DHS Osiris, UM 4-Site oh and a FF MX2 ....addicted mmm yup!!
|
|
#4
|
|||
|
|||
|
Thanks Si, I was hoping someone would say that
|
|
#5
|
|||
|
|||
|
I've got the B6, and it's one of my favourite things (love the blue finish!). The readout for applied charge doesn't seem to make any sense to me either, but as long as the cells all end up at 4.19/4.20V I'm content. I wouldn't worry
__________________
PZ FW190 Lipo ol' faithful PZ Spitfire IX Lipo 1000kV BL, HS81 servos PZ Super Decathlon BL great camera platform PZ Spitfire IA Lipo HZ Aerobird 3 RIP, awaiting salvage decision |
![]() |
| Thread Tools | |
| Display Modes | |
|
|